ReviewEssays.com - Term Papers, Book Reports, Research Papers and College Essays
Search

Water Treatment

Essay by   •  February 26, 2011  •  Essay  •  756 Words (4 Pages)  •  1,176 Views

Essay Preview: Water Treatment

Report this essay
Page 1 of 4

Treating water

The quality of water is crucial to the success of a soft drink. Impurities, such as suspended particles, organic matter, and bacteria, may degrade taste and colour. They are generally removed through the traditional process of a series of coagulation, filtration, and chlorination. Coagulation involves mixing a gelatinous precipitate, or floc (ferric sulphate or aluminium sulphate), into the water. The floc absorbs suspended particles, making them larger and more easily trapped by filters. During the clarification process, alkalinity must be adjusted with an addition of lime to reach the desired pH level. The clarified water is poured through a sand filter to remove fine particles of floc. The water passes through a layer of sand and courser beds of gravel to capture the particles.

Sterilization is necessary to destroy bacteria and organic compounds that might spoil the water's taste or colour. The water is pumped into a storage tank and is dosed with a small amount of free chlorine. The chlorinated water remains in the storage

Mixing the ingredients

The dissolved sugar and flavour concentrates are pumped into the dosing station in a predetermined sequence according to their compatibility. The ingredients are conveyed into batch tanks where they are carefully mixed; too much agitation can cause unwanted aeration. The syrup may be sterilized while in the tanks, using ultraviolet radiation or flash pasteurization, which involves quickly heating and cooling the mixture. Fruit based syrups generally must be pasteurized.

The water and syrup are carefully combined by sophisticated machines, called proportioners, which regulate the flow rates and ratios of the liquids. The vessels are pressurized with carbon dioxide to prevent aeration of the mixture.

Carbonating the beverage

Carbonation is generally added to the finished product, though it may be mixed into the water at an earlier stage. The temperature of the liquid must be carefully controlled since carbon dioxide solubility increases as the liquid temperature decreases. Many carbonators are equipped with their own cooling systems. The amount of carbon dioxide pressure used depends on the type of soft drink. For instance, fruit drinks require far less carbonation than mixer drinks, such as tonics, which are meant to be diluted with other liquids. The beverage is slightly over-pressured with carbon dioxide to facilitate the movement into storage tanks and ultimately to the filler machine

Washing

The bottles are thoroughly washed and rinsed to remove any stains and is properly sterilized

Filling and labelling

The finished product is transferred into bottles or cans at extremely high flow rates. The containers are immediately sealed with pressure-resistant closures, either tinplate or steel crowns with corrugated edges, twist offs, or pull tabs.

Because soft drinks are generally cooled during the manufacturing process, they must be brought to room temperature before labeling to prevent condensation from ruining the labels. This

...

...

Download as:   txt (5 Kb)   pdf (82.6 Kb)   docx (10.8 Kb)  
Continue for 3 more pages »
Only available on ReviewEssays.com
Citation Generator

(2011, 02). Water Treatment. ReviewEssays.com. Retrieved 02, 2011, from https://www.reviewessays.com/essay/Water-Treatment/43540.html

"Water Treatment" ReviewEssays.com. 02 2011. 2011. 02 2011 <https://www.reviewessays.com/essay/Water-Treatment/43540.html>.

"Water Treatment." ReviewEssays.com. ReviewEssays.com, 02 2011. Web. 02 2011. <https://www.reviewessays.com/essay/Water-Treatment/43540.html>.

"Water Treatment." ReviewEssays.com. 02, 2011. Accessed 02, 2011. https://www.reviewessays.com/essay/Water-Treatment/43540.html.